Acewell Ace 3973/3974

Deluxe Modular Loom incorporating the economically priced Acewell dash with warning lights.

Image
(Click to enlarge)		 Options Buy Now
Acewell 3973/3974 dash 1) Select an Option
Savage Switches 2) Provide the details of the Savage Switches you require fully integrating into the Deluxe Loom
Module Fusebox 3) Upgrade to a Modular relay/Fusebox

NOTE: See options below - Not available separately

Deluxe Modular Loom Features

Front Loom Sidelights, Headlights (Main/Dip), O/S-N/S Ind, Horn, Rad Fan, Thermo Switch
Rear Loom Rear Brake Reverse Fog Lights, No Plate, O/S -N/s Ind
Main Loom Fuel Pump, Handbrake, Rev P/U, Front, Rear and Dash connector, Engine (Starter, Ign Coil +ve / -ve, Alt +ve, Alt charge, Water and Oil, Switched +ve)
Dash Loom Acewell Integration sealed connectors, wash wipe, gauges (oil, tacho, fuel, water temp) hazard / ind, switches...
Option to upgrade to include prewired Savage Switches
Relays + 5 gang skts (24x30x88 mm ea) Flasher relay, 3 normally open relays (Main, Dip, Horn), 1x20 amp fused open relay (Rad Fan)
Fuse Box 8 Way (27mm x 88mm)
Connectors Sealed Front / Rear / Acewell

Modular Fuse & Relay System Options

Purchase a Rapidfit Modular Deluxe Loom incorporating a fully integrated Modular Fuse and Relay Housing System.
This system offers the opportunity to introduce a top quality box mounted system.
Comes available in 4 and 5 modules with the following mix of combinations:
Option 1 - (£100) 1 x 4 Module housing and cover
1 x 20 Mini Blade fuse holder
1 x 6 Micro relays
2 x 2 Standard relays
Option 2 - (£95) 1 x 4 Module housing and cover
1 x 20 Mini Blade fuse holder
1 x 6 Micro relays
1 x 10 Mini Blade fuse holder + Maxi relay
1 x 2 Standard relays
Option 3 - (£120) 1 x 5 Module housing and cover
1 x 20 Mini Blade fuse holder
1 x 6 Micro relays
1 x 10 Mini Blade fuse holder + Maxi relay
2 x 2 Standard relays
Option 4 - (£126) 1 x 5 Module housing and cover
1 x 20 Mini Blade fuse holder
1 x 6 Micro relays
3 x 3 Standard relays

Ace-3973/3974 Features

Features
  • Digital multifunction LCD ATV / Motorcycle computer displays analogue and digital tachometer, speedometer, voltmeter, temperature gauge, fuel gauge and clock.
  • LCD has 2 digital rows and analogue switchable 8000 / 16000 RPM bar-graphic display with grey LED backlight
  • Odometer and total riding timer cannot be reset and are permanently stored in memory
  • End user is able to modify the odometer value whilst it displays less than 30km. This allows the purchaser to pre-set the reading to match the speedometer they are replacing
  • Displays clock when in standby mode
  • Can be easily switched between MPH and KMH
  • Adjustable wheel circumference from 1 to 3999mm
  • Fully waterproof
  • Includes bracket, speed sensor and wiring harness
  • Vibration (8G) and mechanical shock (10G) tested
  • EMI / EMS tested, E-Mark certificate
  • Dimensions: 128mm x 78mm x 28.5mm
  • Black plastic or black billet case
  • Waterproof plugs
  • High speed processor can work with electronic 3 wire gearbox speed sensors
  • Displays "n" and "r" symbols within LCD
  • Fuel gauge can work with 100/250/510 ohm senders (full high or low resistance) or can be switched off if not required

Functions Symbol Specification
Bar Graphic Tachometer 250 - 8,000 RPM / 500 - 16,000 PRM
Digital Tachometer and warning RPM 10-19900RPM, 100RPM increment
Speedometer KM/H / MPH 2.4-399km/h 248.5mph
Trip meter 1 & 2 TRIP 1/2 0.0 - 999.9 km/miles
Odometer ODO 0-999999 km / 0-624999 miles
12 / 24 hour clock 0:00 - 11:59 / 23:59
Average Speed AVG 2.4 - 399KM/H (248MPH)
Riding Timer RT 0-9999H59
Maximum Speed MAX 2.4 - 399KM/H (248MPH)
Total Riding Time TT 0-999999H
Bar-Fuel Meter +/- 100/250/510 ohms and off
Voltmeter V 8v - 25v
3973 - Display warning symbols 3973 warning display
3974 - Display warning symbols 3974 warning display