Acewell Ace 7659

Deluxe Modular Loom incorporating the economically priced Acewell dash with warning lights.

Image
(Click to enlarge)		 Options Buy Now
Acewell 7659 dash 1) Select an Option
Savage Switches 2) Provide the details of the Savage Switches you require fully integrating into the Deluxe Loom
Module Fusebox 3) Upgrade to a Modular relay/Fusebox

NOTE: See options below - Not available separately

Deluxe Modular Loom Features

Front Loom Sidelights, Headlights (Main/Dip), O/S-N/S Ind, Horn, Rad Fan, Thermo Switch
Rear Loom Rear Brake Reverse Fog Lights, No Plate, O/S -N/s Ind
Main Loom Fuel Pump, Handbrake, Rev P/U, Front, Rear and Dash connector, Engine (Starter, Ign Coil +ve / -ve, Alt +ve, Alt charge, Water and Oil, Switched +ve)
Dash Loom Acewell Integration sealed connectors, wash wipe, gauges (oil, tacho, fuel, water temp) hazard / ind, switches...
Option to upgrade to include prewired Savage Switches
Relays + 5 gang skts (24x30x88 mm ea) Flasher relay, 3 normally open relays (Main, Dip, Horn), 1x20 amp fused open relay (Rad Fan)
Fuse Box 8 Way (27mm x 88mm)
Connectors Sealed Front / Rear / Acewell

Modular Fuse & Relay System Options

Purchase a Rapidfit Modular Deluxe Loom incorporating a fully integrated Modular Fuse and Relay Housing System.
This system offers the opportunity to introduce a top quality box mounted system.
Comes available in 4 and 5 modules with the following mix of combinations:
Option 1 - (£100) 1 x 4 Module housing and cover
1 x 20 Mini Blade fuse holder
1 x 6 Micro relays
2 x 2 Standard relays
Option 2 - (£95) 1 x 4 Module housing and cover
1 x 20 Mini Blade fuse holder
1 x 6 Micro relays
1 x 10 Mini Blade fuse holder + Maxi relay
1 x 2 Standard relays
Option 3 - (£120) 1 x 5 Module housing and cover
1 x 20 Mini Blade fuse holder
1 x 6 Micro relays
1 x 10 Mini Blade fuse holder + Maxi relay
2 x 2 Standard relays
Option 4 - (£126) 1 x 5 Module housing and cover
1 x 20 Mini Blade fuse holder
1 x 6 Micro relays
3 x 3 Standard relays

Ace-7659 Features

One piece oval shaped computer with all the functions you need on any road vehicle. The car version includes 4x4 symbole and is IVA compliant. Gear indicator, fully configurable fuel gauge and voltmeter.

Features:
  • Simultaneously displays tachometer, speedometer, fuel gauge and bar-graph temperature meter, gear indicator, 4x4 symbol as well as one other digital readout. The extra sensor input can be used to add a sender to show oil temperature if required.
  • Backlight can be switched with sidelights as per IVA requirements
  • Warning lamps meet requirements of IVA test
  • Bar-graph tachometer can be set to show 0-10,000 or 0-20,000 RPM
  • Compatible with both car and motorcycle engined vehicles
  • Speed input can connect to included magnet/reed switch sensor or optional cable drive adaptor or directly to many speed sensors fitted to automotive gearboxes
  • Gear indicator calculates gear by comparing speed and RPM on manual gearbox cars, so no additional sensors are required
  • 100% water resistant so can be fitted in beach buggies without worrying about rain damage
  • Includes RPM sensing wire, speed sensor, temperature sensor, and generic wiring harness
  • E-Marked for road vehicle use within Europe
  • 170mm x 100.5mm x 30mm

Each kit Includes:

  • 1 x Computer
  • 1 x ACE-G Speed sensor and magnet
  • 1 x ACE-PT1/8 Temperature sensor 1/8 NPT which can be used for water or oil temp.
  • 2 x Temperature sensor inputs which can measure water or oil temperature, but please note that only one sender is supplied.
  • Programmable Fuel Gauge which can be set for 10-990 ohms resistance for both full and empty so that it can connect to almost any sender.
  • Voltage warning lamp can be configured for the voltages to come on and off to suit any vehicle
  • 1 x Set of cables & fitting instructions.